Waterproofing Cement-based Concrete Protective Coatings

Exterior applied finishes and surrounding areas are damaged by water unless it is controlled through waterproofing coating applications. Waterproofing is easy, it's an investment that can lower the risk of water damage.

Unless correct waterproofing coatings and applications are provided a lot of problems will occur :- footings, mortar, bricks, concrete, concrete block, masonry substrates,tanks. swimming pools, tunnels, galleries, basements and elevator pits, façades and wall faces and prefabricated panels are adverse effected by water damage.

Wet areas which are not protected correctly with the correct waterproofing coatings put your investment at risk. Wet areas which are protected correctly saves you money in the long term, adds value to your investment. No damage. No risk. Concrete Pools can be waterproofed to stop the water leaks and contain future damage.

Water always finds any weakness in below ground construction. Correct waterproofing procedures can help prevent water damage to any concrete surface. Waterproofing Concrete Basements against water ingress whether it be negative or positive pressure can be achieved with our special application cement-based waterproofing coatings.

 

Below are several waterproofing and structural repair applications that are commonly experienced.

Waterproofing Quick Set Hydraulic Cement Mortar

Quickly repair and instantly stop running water from cracks, holes or other openings in concrete and masonry.

Stop water under pressure in basements, tunnels and sewers -with hydraulic waterproofing cement.

A fast setting mortar to anchor bolts and other accessories that require immediate use.

Sets within three to five minutes depending on the temperature. It sets under water

It is not toxic when it comes into contact with drinking water.

Stop leaks and waterproof surface.

Quick Set hydraulic mortar

Quick-setting Structural Repair Mortar For Concrete & Masonry

quick-setting structural patching and protective covering repair mortar for concrete and masonary

A thixotropic quick-setting product for restoration of lines and shapes. It firmly adheres to the surface it is applied on, and restores damaged pre-fabricated concrete to its original condition

For general repair and restoration work on structural concrete, repairs honeycombs, cracks and fissures, lintels, raincaps, water tanks and restore architectural concrete.

a patching and protective covering of superficial reinforcing rods affected by corrosion.

Sealing of construction joints previous to waterproofings works in tanks, swimming pools, basements, etc.

Structural concrete repair & restoration mortar

Waterproofing Cement-Based Coatings For Concrete & Masonry

A cement-based mortar with special additives and controlled aggregates. Once cured, it becomes a suitable waterproof coating for use on concrete, brick, concrete block, masonry substrates

Waterproofing and coating of drinking water tanks. swimming pools. tunnels, galleries, basements and elevator pits subjected to high water pressure.

Waterproofing and protection of concrete in water treatment plants, setting tanks, Coating for waterproofing of dams and retaining walls.

Waterproof coating for façades and wall faces, concrete blocks and prefabricated panels.

Restoration and waterproofing of channels.

Waterproofing and decorative finish for silos and cooling towers in thermal power plants.

Waterproofing and coating cement-based mortarfor both positive and negative hydrostatic pressures.

Waterproofing cement-based protection and coatings

 

Waterproofing Cement-Based Coating For Exterior Underground Concrete & Masonry

A construction grade cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives great protection to foundation concrete thanks to its high resistance to aggressive waters
Waterproofing Foundation Concrete
Waterproofing of retaining walls, carparks, basements, elevator pits, tanks and dams.
Concrete and masonry foundation walls subject to great pressures and water aggressiveness.

Concrete and masonry foundation walls
Unaffected by soil salts. In a positive application.

Concrete waterproofing cement-based coating

Flexible Waterproofing Against Positive & Negative Pressure
For Concrete, Masonry, Blocks, Pre-Fabricated Panels & Brick

Waterproofing and protection of water retaining structures.

Waterproofing drinking water tanks, reservoirs, water mains and swimming pools. Waterproofing of below-grade structures.

Waterproofing basements, retaining walls, foundations, tunnels, galleries subjected to both positive or negative high water pressure. Internal and external waterproofing and protection of new and old buildings, façades against dampness, rain, pollution and aggressive environments. Waterproofing and protection of concrete against carbonation, freeze-thaw cycles, de-icing salts in highways and chlorine penetration in public works, irrigation channels, dams, retaining walls and water treatment plants, bridges, etc. Tile fixing and waterproofing of bathrooms, kitchens and other wet rooms in hotels, hospitals, offices and residential buildings, also suitable for exterior applications.

Damp proofing of basements and any concrete cement surface

flexible waterproofing coating that adheres to practically every surface such as concrete, natural and artificial stone, mortar plasters, bricks, concrete blocks, etc. subjected to both positive or negative high water pressure
Waterproof coating that adheres to common substrates in construction such as concrete, natural and artificial stone, traditional mortar plasters, bricks, concrete blocks.

non-toxic flexible waterproof coating waterproofing common substrates in construction such as concrete, natural and artificial stone, traditional mortar plasters, bricks, concrete blocks.

Flexible Waterproofing Against Positive & Negative Pressure

Repairing Structural Concrete & Masonry

Restoration Structural Patching and Repairing Concrete and Masonry

Non-Shrink, Quick-Setting Structural Repair Mortar For Concrete & Masonry

Restore concrete to its original condition

a thixotropic product with quick-setting that does not shrink. It firmly adheres to the surface which it is applied on

Repair & restore structural concrete

For general repair and restoration work on structural concrete. Repairs honeycombs, cracks and fissures.

Patching and protective covering

• Patching and protective covering of superficial reinforcing rods affected by corrosion.
• Repair lintels, raincaps, water tanks and restore architectural concrete permanently exposed to climatic conditions.
• Sealing of construction joints previous to waterproofings works in tanks, swimming pools, basements, etc.
• For restoration of lines and shapes of damaged pre-fabricated concrete elements.

Repair & restoration mortar for structural concrete

Waterproofing Anchoring Cement For Concrete & Masonry - Quick Setting

Waterproofing Anchoring Cement.

• Setting anchor bolts, rail posts, signposts, parking meters, park seats, bridge railings, safety rails, hand rails, partitions, balustrades, reinforcing rods and fixtures. Flag and light poles - Heavy machinery anchoring, hooks, pulleys.

• Water Sewer Management, Road Rail, Construction Building, Swimming Pool Industry, Bridge Building, Councils, Heavy Industry, Mining, Steel, Defence Forces.
• A pourable, cement-base, non-shrinking, quick-setting hydraulic compound.

Waterproofing Anchoring Cement For Concrete & Masonry - Quick Setting

Normal Setting, Polymer-Modified, Fiber-Reinforced, Structural Repair Mortar With Corrosion Inhibitors

Repairing new and old concretes.

• A cement-based, microsilica and polymer-modified, fiber-reinforced restoration mortar with corrosion inhibitors.
High performance structural concrete repair.
• Providing additional protection for steel reinforcements.

Maintenance & Repairing structural concrete & reinforcements

• Maintenance of industrial areas damaged by aggressive environment, acid rain, atmospheric pollution, etc.
• Repairing Structural concrete affected by corrosion of reinforcements in marine environments, bridges, harbours, dams, etc.
• Repair of concrete structures with carbonation process.
• Repairing concrete damaged by deicing-salts, freeze/thaw cycles, mechanical impacts, etc.
• Repairing Concrete affected by repeated loads.
• Repairing pre-fabricated concrete elements.

Repairing Maintenance Structural concrete & reinforcements

Elastic Mortar For Sealing Joints Subject To Movement In Concrete, Prefabricated & Ceramic Elements

MAXJOINT® Elastic

An elastomeric product with high bond strength is achieved, suitable for sealing joints and cracks in concrete, pre cast elements, mortars and bricks.

Sealing expansion & immersion joints

Sealing expansion joints with an in service joint movement up to 15%.
Sealing Joints in permanent immersion in pipelines, water reservoirs, water treatment plants, etc.
Sealing Joints of concrete prefabricated elements and ceramic in facades and building construction
Sealing of active cracks in concrete and masonry.
Pointing mortar on substrates subject to movement.
Sealing expansion joints active cracks

Clear waterproof coating

Clear waterproof coating for concrete, brick, natural stone & other masonry surfaces.

External waterproofing of block and brick, fibrous sheet and porous tile facades - is an oligomeric siloxane, when applied to concrete, brick and natural stone facades, allowing the façade to breathe, will not allow moisture to penetrate

Waterproofing finish without changing the outward appearance. Reduce ingress of water, preventing water-related problems: e.g. reinforcement corrosion, binder loss and biological promoted decay due to moss. for use in high pH conditions e.g. new concrete, lime mortars and lime based building bricks/blocks.

· Prevention of moss growth and dirt retention on pavers, walls and roofs.

· Reduce sandstone decay. Eliminate white salt spotting. Treatment of rising damp in old homes. Protection of reinforced concrete against steel corrosion by chloride diffusion.

seal porous natural stone leaving a natural finish.
clear waterproof coating